Vszerda Mini SAS SFF-8088 Male to 4 SATA Female 3.3ft Cable
Connects a Mini SAS SFF-8088 controller to four SATA drives at 3.0 Gbps over a 3.3 ft copper cable
- Rated speed3 Gbit/s
- Connector detailsScsi
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeMini SAS
- Overall length3.3 ft (1.01 m)
- Connects controller to four drives via 26-pin SFF-8088 to 4x SATA
- 0 Gbps throughput supports high-speed storage arrays
- 3 ft length fits standard rack and chassis layouts
- Press-button latch enables secure one-hand insertion and release
- Copper conductors deliver reliable signal integrity for data centers
External Mini SAS SFF-8088 Cable
This new Vszerda cable bridges an external Mini SAS SFF-8088 male connector to four SATA female connectors over a 3.3 foot length. It is built for administrators and builders who need to link a SAS controller or host adapter to a SATA backplane or drive cage in a server or workstation. The copper conductors support a 3.0 Gb/s signalling rate and the latch-equipped plug uses an upgraded press-button release for easier insertion and removal.
Suits SAS-to-SATA fan-out
The assembly fits installations where a single external Mini SAS port must feed up to four SATA targets, such as direct-attached storage enclosures or internal hot-swap bays. It will not work for setups that require an internal Mini SAS connector, a different pin count, or a pure SATA host connection. Builders needing longer runs, higher SAS speeds, or angled connectors should look at other cable designs.
SFF-8088 male to four SATA female
The decisive specification is the 26-pin SFF-8088 male plug on one end and four 7-pin SATA female receptacles on the other, defining exactly which controllers and backplanes can be connected without adapters.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Heretom |
| Model name | 699909837574 |
| Product type | Mini SAS |
| Performance | |
| Rated speed | 3 Gbit/s |
| Ports & slots | |
| Connector details | Scsi |
| Connector gender | Male-to-Female |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Conductor type | Copper |
Questions about this item
What controller interface do I need for the SFF-8088 male connector to work?
You need a controller or host bus adapter with an external SFF-8088 Mini SAS port to plug the 26-pin male connector into.
Will the 3.0 Gbps Mini SAS link still run if I attach older SATA drives to the four 7-pin female connectors?
Yes, the SAS interface is backwards compatible with SATA, so each drive will operate at its own SATA speed while the cable carries up to 3.0 Gbps per lane.
How can I verify the cable is seated correctly after connecting it?
Press the upgraded release button on the SFF-8088 plug until it clicks, then confirm each SATA connector is fully inserted and the system detects all four drives.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
- Male
- USB
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





