Vszerda PCIe SATA 3.0 2-port card with 2 cables
Adds two 6 Gbit/s SATA ports via a PCIe 1x slot with JMicron JMB582 chipset, includes two cables and a low-profile bracket
- Adds two SATA 3.0 ports with 6.0 Gbit/s transfer speed
- Includes two SATA cables and a thin short bracket for immediate setup
- JMicron JMB582 chip improves stability and supports AHCI 1.0 and IDE modes
- Fits PCIe 1x through 16x slots for broad motherboard compatibility
- Works with Windows XP to 10, Server 2003 and 2008, and Linux
Two-port SATA 6 Gbit/s expansion card
This PCIe 3.0 ×1 card adds two SATA 3.0 ports to a desktop system and includes two SATA cables and a low-profile bracket. It targets builders who need extra internal drive connections without occupying a larger slot. The JMicron JMB582 controller provides native AHCI and IDE support across Windows and Linux platforms.
Sustained 6 Gbit/s throughput with NCQ
The JMB582 chipset maintains Gen 3i signalling rates during extended transfers rather than throttling after a burst. Native Command Queuing reorders commands to keep the link saturated under mixed read and write workloads. A fitted heatsink dissipates controller heat so performance stays consistent during long backup or cloning sessions.
Single-lane PCIe 3.0 host interface
Bandwidth is capped by the single PCIe 3.0 lane, so the card cannot exceed roughly 8 Gbit/s aggregate host throughput even though each SATA port supports 6 Gbit/s. Builders needing more than two concurrent high-speed drives should consider a multi-lane HBA instead.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 88% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the JMB582 controller draw when the card runs all day?
The PCIe 1× slot supplies up to 10 W and the JMB582 chip typically stays well within that limit.
Which slot type and bracket does my chassis need for this card?
It fits any PCIe 1×, 4×, 8× or 16× slot and includes a thin short bracket for low-profile cases.
Will my older 1.5 Gbit/s SATA drives work at full speed on this card?
Yes — the controller negotiates 6.0, 3.0 and 1.5 Gbit/s automatically, so legacy drives run at their rated speed.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BUCIER SFF-8087 to 4 SATA Breakout Cable 3.3FT 2Pack
- 6 Gbit/s
- SAS to SATA, Mini S…
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





