Vszerda SAS Internal 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 100 cm
Connects four SATA drives to a four-port SAS controller at 6 Gbps over 100 cm
Cable Length 100 cm
- 50 cm$14.99
- 100 cm$17.99
- Connect four drives with one cable using 4×7-pin SATA connectors
- Supports 6 Gbps SAS spec for fast server RAID transfers
- 100 cm length reaches drives across full-tower chassis
- Straight 7-pin plugs ensure secure lock on host and target ports
- New cable ships ready for immediate internal storage upgrades
SAS 4 SATA Host Cable
This cable connects four SATA drives to a single SAS 4 SATA host controller using 7-pin connectors on both ends. It is intended for server and RAID deployments that require a direct multi-drive link without a backplane. Builders using consumer motherboards with standard SATA ports will not be able to attach the host connector.
Capacity and headroom
The link operates at up to 6 Gbps per lane, matching the SATA 6 Gbps specification and providing full bandwidth for four mechanical drives or SATA SSDs. Performance will be limited by the slowest drive on the channel, and the cable does not add any RAID processing or port multiplication beyond the four physical connections.
Bundled accessories impact
No additional brackets, mounting hardware, or software utilities are included with the cable. Installation relies entirely on the existing drive bays and controller card in the chassis, so the accessory bundle does not change any system requirements or configuration steps.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda SFF-8087 to 4x SFF-8482 SAS cable with 15-pin SATA power 100 cm
Questions about this item
Will the 100 cm cable reach drives in a full-tower case when the controller is mounted at the top?
At 100 cm the cable spans most full-tower layouts; route it behind the motherboard tray to avoid tension on the four SATA 7-pin connectors.
How can I confirm the 6 Gbps link is active after connecting four drives?
Check the controller BIOS or OS disk utility — each drive should report a 6 Gbps SAS/SATA link speed with no errors.
Does the package include mounting brackets or only the 4-to-4 SATA cable?
Only the 100 cm SAS internal cable with four SATA 7-pin host and four SATA 7-pin target connectors is supplied.
More in SATA & eSATA Drive Cables
Similar items
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III










