Vszerda SATA-III 6-pack 1 m 90° straight-to-right-angle SATA cable
Six 1 m SATA cables with straight-to-90° connectors for drives and controllers
- Rated speed6 Gbit/s
- Conductor typeNylon
- Product typeSATA Cables
- Product colorBlack/Blue
- Overall length3.3
- 6 Gbps transfer speed keeps storage fast
- 90° right-angle plugs fit tight server bays
- 30 AWG nylon-braided wires simplify cable routing
- Six labelled cables support RAID or multi-drive arrays
- 3 ft length reaches drives across full-size cases
Six-cable SATA-III kit
This pack contains six SATA-III data cables, each 3.3 ft long, with a straight connector on one end and a 90-degree connector on the other. They link 2.5 in or 3.5 in drives, optical units or RAID controllers to a motherboard or host controller. The cables carry data only and do not supply power.
Thermals noise and power
Passive cables generate no heat, produce no noise and draw no power of their own. The 30 AWG conductors are nylon-braided into a single bundle that keeps airflow clear inside tight server or mining chassis. Locking latches on each connector prevent accidental unplugging during vibration.
6 Gbps SATA-III rating
Rated for 6 Gbps transfer speeds, the cables are backwards compatible with SATA I and SATA II devices. Actual throughput is limited by the slowest attached component. Buyers who need power delivery or a different connector angle should look elsewhere.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-011 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Nylon |
Questions about this item
How do I install these SATA cables and which step is often missed?
Connect the straight 7-pin end to the motherboard or controller and the 90° end to the drive, then engage the locking latch on each connector until it clicks; the latch is the step people skip, leaving the link unsecured.
What maintenance or replacement will these cables need later?
The nylon braided 30 AWG conductors are rated for 6 Gbps SATA III and are backwards compatible with SATA I and II; no periodic maintenance is required, but replace any cable if the latch breaks or the braid frays.
What limit appears first under sustained use?
The 6 Gbps SATA III ceiling is the first bottleneck; actual throughput cannot exceed the rating of the attached drive or controller, so sustained transfers top out at that interface speed.
More in SATA & eSATA Drive Cables
Similar items
DIXSG 3-pack SATA cable 90° straight to right angle 6Gbps 50cm 18 inch
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III





