Vszerda SFF-8087 to 4 Right-Angle SATA Cable 1.64ft
Connects an SFF-8087 RAID controller to four right-angle SATA drives at up to 6Gbps each over a 1.64ft blue cable with black sleeving and port markers
- Connects SFF-8087 RAID controller to four SATA drives
- Right-angle SATA connectors ease routing in tight chassis
- Supports 6Gbps transfer rate per SATA drive
- 64ft length suits compact server builds
- Woven mesh sleeve protects half the cable run
Mini SAS breakout for four SATA drives
This 1.64ft forward breakout cable connects a controller or RAID card with an SFF-8087 male latch-locking port to four right-angle SATA female latch-locking targets. It is built for internal server or workstation storage arrays where a single Mini SAS link fans out to multiple hard drives or solid-state drives.
Replaces loose fan-out or straight-connector cables
The right-angle SATA ends reduce strain in tight drive cages and the half-length woven mesh sheath keeps the four lanes tidy during routing. P1–P4 markers on the connectors make post-install identification simple. The jump is worth it when a straight SATA plug blocks adjacent bays or when cable clutter hinders airflow in dense 2.0 x8 lane configurations.
Fits builds with an SFF-8087 host port
Each lane supports up to 6Gbps data transfer to the attached drive. The blue cable with black sleeving provides visual contrast for cable management. It frees up space around crowded backplanes by using angled connectors, and the latch locks on both ends secure the link against vibration in rackmount or tower chassis.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What clearance does the right-angle SATA connector need behind the drive?
Each SATA connector is angled to sit close against the drive body, so you only need the depth of the connector itself plus the cable bend radius.
Which side of the SFF-8087 plug faces up when inserting it into the controller?
The latch on the SFF-8087 male connector clicks when the raised tab aligns with the slot on the controller port; push straight in until the latch snaps.
How do I identify which SATA lead goes to which drive after routing the cable?
The four breakout leads are labelled P1 to P4 on the sheath, matching the port order on the SFF-8087 connector.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000219black-3p SATA III cable 3-pack 18 inch black
- Sata III
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA





