Vszerda SFF-8643 to 4x SFF-8482 breakout cable 1m
Connects a 12 Gbps SAS controller to four 29-pin SATA or SAS drives with integrated 15-pin power
- Rated speed12 Gbit/s
- Connector detailsSas
- Connector genderFemale-to-Female
- Conductor typeCopper
- Product typeSATA
- Product colorBlack
- 12 Gbps SAS 3.0 speed for high-throughput storage arrays
- SFF-8643 host breaks out to four 29-pin SFF-8482 drive connectors
- Integrated 15-pin SATA power on each target eliminates separate power cables
- Copper conductors maintain signal integrity over 1 metre length
- Female-to-female terminals connect RAID controllers directly to SAS or SATA drives
Vszerda SFF-8643 breakout cable
This Vszerda cable connects a single SFF-8643 Mini SAS host port to four SFF-8482 29-pin target connectors. It carries SAS 3.0 signals at up to 12 Gbps and includes an integrated 15-pin SATA power branch on the target side. The 1 metre copper assembly is built for internal server and workstation storage chains.
Suits RAID controllers with SFF-8643 host ports
Builders attaching up to four SAS or SATA drives to a controller or HBA that presents an SFF-8643 host interface will find this cable fits directly. It is not suitable when the SFF-8643 port sits on a backplane rather than the controller, nor for installations that require a different target connector or longer reach than one metre.
Straightforward internal routing
The fan-out design lets each 29-pin leg plug into a drive bay without adapters, and the attached SATA power tails draw from the same supply as the disks. Cable stiffness is typical for shielded copper at this gauge, so allow a gentle bend radius behind the backplane. The only common issue is reversing host and target ends; the SFF-8643 plug must face the controller.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EDIMS |
| Model name | SFF-8643-SFF-8482 |
| Product type | SATA |
| Product color | Black |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector details | Sas |
| Connector gender | Female-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What connector must my RAID controller or motherboard have to plug the SFF-8643 end of this breakout cable?
The host side uses an SFF-8643 Mini SAS connector, so your controller or motherboard needs a matching SFF-8643 port.
Will the four SFF-8482 connectors work with older 6 Gbps SAS or SATA drives I already own?
Yes, the cable meets the SAS 3.0 specification at 12 Gbps and is backward-compatible with 6 Gbps SAS and SATA drives attached to the four 29-pin SFF-8482 targets.
How can I confirm each drive is receiving power through the attached 15-pin SATA power leads after installation?
Check that the 15-pin SATA power connectors on the SFF-8482 side are firmly seated and verify drive spin-up and detection in the RAID controller BIOS or OS disk utility.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
- Male
- USB
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





