YEPLOOK 4 SATA to 4 SATA 6Gbps SAS cable 2.3 ft
Connects four SATA drives at 6 Gbps with a 2.3 ft blue braided cable supporting hot swap
- Product colorBlue
Cable Length 2.3 ft.
- 1.6 Feet$8.99
- 2.3 ft.$9.99
- 3.28 Feet$11.99
- 6 Gbps transfer speed supports fast drive arrays
- 3 ft length fits typical server chassis
- Four SATA connectors link multiple drives at once
- Braided nylon mesh keeps cables tidy and ventilated
- Hot-swap support allows drive changes without power-down
Cable purpose and audience
This cable connects four SATA drives to a single SAS or SATA controller using a 4 SATA to 4 SATA layout. It suits server builders and storage enthusiasts adding multiple hard drives or SSDs to a backplane or RAID card.
Capacity and headroom
Each lane carries data at up to 6Gbps under the SATA 3.0 specification. The 2.3 ft length fits typical server chassis routing while supporting hot-swap drive trays. Bandwidth per drive remains at the SATA 6Gbps ceiling, so four saturated drives can saturate the upstream link.
Thermals noise and power
The cable draws no external power and adds no active cooling requirement. Its nylon braided mesh sleeve promotes airflow around the wire bundle inside the chassis. Passive operation means zero acoustic contribution and no thermal load on the system.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | 4 SATA TO 4 SATA |
| Product color | Blue |
Other versions of this model
2 more in the same range
Questions about this item
Will this 4 SATA to 4 SATA cable work with the older SATA 3 Gbps hard drives I already have installed?
Yes. The cable supports SATA 3.0 at 6 Gbps and is backward compatible with earlier SATA revisions, so existing 3 Gbps drives will function at their native speed.
How can I verify the 6 Gbps link is active after connecting the cable to my server backplane?
Check the negotiated link speed in your RAID controller BIOS, HBA utility, or operating-system disk tool; it should report 6 Gbps for each connected drive when the cable is seated correctly.
Does the 2.3 ft blue braided cable include mounting brackets or only the 7-pin connectors?
Only the symmetrical double straight 7-pin SATA connectors on a nylon braided mesh cable are included; brackets, screws or additional adapters must be sourced separately.
More in SATA & eSATA Drive Cables
Similar items
BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
- Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA







