We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 600mm switch cable with spade connectors and DuPont motherboard plug

Dimastech

Dimastech Switch Cable BT105 600mm

SKU CH-P8J4-ASRBP

Connects a vandal-resistant switch to a motherboard using spade and DuPont connectors, 600 mm long

  • Cable length1.97 ft (0.6 m)

Color Black 600mm

  • Connects vandal-resistant switch to motherboard
  • Spade connectors fit switch terminals securely
  • DuPont 1-2 pin header plugs into board
  • 600mm length suits full-tower cable routing
  • Ready to install with no crimping needed

Dimastech Switch Cable BT105 600mm

This internal power cable connects a vandal-resistant switch to a motherboard. It is intended for builders adding a front-panel power or reset button to a custom chassis. The 600mm length suits mid-tower and larger cases where the switch sits away from the board. One end uses spade terminals for the switch, the other a 1 and 2 pin DuPont connector for the header.

Easy installation with spade and DuPont ends

Push the spade terminals onto the switch lugs and seat the DuPont plug onto the motherboard front-panel header. No tools or soldering are required. The main risk is reversing the two DuPont pins, which will leave the switch non-functional. Verify the header pin-out in your board manual before connecting. Route the cable clear of fans and sharp edges to avoid insulation damage.

Check header layout and switch compatibility

Confirm your motherboard provides a standard two-pin front-panel header with 1 and 2 pin spacing that matches the DuPont connector. Ensure the vandal-resistant switch uses spade terminals compatible with the cable ends. The 1.97 ft length must reach from the switch mounting point to the header without tension. Buyers needing a different connector style or a longer run should look elsewhere.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $1.99
Cheaper than about 98% of the 7,772 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Size & build
Cable length1.97 ft (0.6 m)

Other versions of this model

3 more in the same range

Questions about this item

How can I confirm the BT105 cable is working after connecting it?

Press the vandal resistant switch; the motherboard should register the signal and power the system on or off as expected.

What does the box contain and what extra parts are needed?

The box includes one 600 mm black cable with spade connectors on one end and a 1 and 2 pin DuPont connector on the other; you must supply the vandal resistant switch and a motherboard with a 2-pin I/O header.

Which version or capacity of this cable should I choose?

The BT105 is offered only in a single 600 mm length with the described connector arrangement, so no alternative version or capacity exists.

More in Internal PSU & Riser Cables

Similar items