Monoprice 140373 SATA 6Gbps locking cable 10 in black
A 10-inch SATA cable with locking latches on both ends supports up to 6 Gbps with compatible devices
- Cable length0.83 ft (0.25 m)
- Connector count2
- Product typeOthers
- Product colorBlack
- Overall length0.254
- Key featuresUp to 6 Gbit/s when used with equivalent devices and control
- Supports 6 Gbps speeds with SATA 3.0 devices
- Locking latches prevent disconnection from vibration
- 10-inch length suits compact internal builds
- Straight connectors fit standard drive ports
- Backward compatible with 1.5 and 3.0 Gbps hardware
Connection type and length
This Monoprice SATA 6Gbps cable measures 10 inches or .83 feet and carries two straight connectors. Each end has an attached locking latch designed to resist movement and vibration. The black cable suits internal SSD, hard drive or optical drive connections.
Speed rating and compatibility
The cable supports up to 6 Gbps when paired with matching devices and controllers. It is backwards compatible with 3.0 Gbps and 1.5 Gbps hardware, though the subsystem will run at the slowest linked speed.
Reach and headroom
At 10 inches the cable spans short internal runs between adjacent drive bays or a motherboard header and a nearby drive. Longer routes across a full tower chassis will exceed its length and require a different cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 93% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 140373 |
| Product type | Others |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Cable length | 0.83 ft (0.25 m) |
Questions about this item
What real-world speed will I see from the 6 Gbps rating once the cable is installed?
The cable supports up to 6 Gbps when both the drive and controller are SATA 3.0 devices; the subsystem runs at the speed of the slowest component, so a 1.5 Gbps drive or controller will limit throughput to 1.5 Gbps.
How does the SATA 6 Gbps standard affect what this cable can actually deliver?
SATA Revision 3.0 defines a 6 Gbps ceiling; this cable meets the tighter material tolerances required for that rate, but actual throughput is capped by the lowest-rated device in the chain.
What clearance and mounting style does the 10-inch straight locking connector need?
Each end has a straight connector with an attached locking latch, so you need enough straight-line space behind the drive and motherboard port for the latch to engage without obstruction.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CoolGear SS-22MPS SATA power splitter 1 to 3 15-pin
- 1 SATA to 3X SATA





