SATACables iLEXT-3-24in eSATA cable 20 inch red
Red 20-inch eSATA extension cable with male-to-female connectors extends SATA I or SATA II data links up to 1.66 ft
- Cable length1.66 ft (0.51 m)
- Connector count2
- Product colorRed
- Overall length21 in - 25 in
- Design styleStraight
- Extends SATA I and SATA II cables with male-to-female connectors
- 20-inch red cable reaches drives in tight chassis layouts
- 26 AWG solid tinned copper conductors maintain signal integrity
- Gold-plated contacts rated at 15 micro-inches resist corrosion
- 100 ohm controlled impedance supports 150/300 MB/s data rates
Red 20 inch eSATA extension cable
This red eSATA extension cable adds length between a host port and a SATA I or SATA II device. It carries a straight male connector on one end and a straight female connector on the other. The 1.66 ft cable suits bench testing, drive docking and permanent internal routing where the stock lead falls short.
Straight male to female connectors install
Push the male end into the motherboard or controller port and attach the existing drive cable to the female end. No tools, drivers or orientation tricks are required. The 26 AWG solid tinned copper conductors and hot-melt aluminium Mylar spiral shielding keep attenuation at 6 dB max from 10 MHz to 4500 MHz, so signal integrity stays intact across the added length.
Check port type and clearance before ordering
Verify the host port is a standard 7 pin SATA or eSATA socket; the cable will not fit proprietary or mini variants. Ensure 2.2 mm by 7.80 mm jacket clearance around the connector housing, which uses UL 94V-0 rated polyester and glass fibre. The assembly is rated to 80 degrees Celsius and 30 V, so confirm the chassis airflow and voltage environment match.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 93% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | iLEXT-3-24 in |
| Product color | Red |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 21 in - 25 in |
| Cable length | 1.66 ft (0.51 m) |
Questions about this item
How can I confirm the cable is carrying a reliable signal after I connect it?
After connecting the cable, verify that the drive is detected at the expected SATA I or SATA II transfer rate and that no data errors appear during read or write operations.
What comes with the cable and what must I supply myself?
The package includes the 20 inch red eSATA extension cable with a straight male connector on one end and a straight female connector on the other; you must provide the SATA I or SATA II data cables you intend to extend.
Which length should I choose for my setup?
This model is offered in a 20 inch length (approximately 1.66 ft); select it when you need a short internal extension between a motherboard or controller and a drive bay.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CoolGear SS-22MPS SATA power splitter 1 to 3 15-pin
- 1 SATA to 3X SATA





