SATACables LP30SR330 13 Inch Low Profile Right to Straight SATA Cable
A 13-inch low-profile SATA cable with a right-angle connector for tight internal spaces, supporting 6.0 Gbps data transfer
- Cable length1.08 ft / 8 in
- 6 Gbps throughput from SATA III 6.0 Gbps rating
- 13 inch low-profile right-angle plug improves case airflow
- Shielded silver-mesh jacket blocks EMI and RFI noise
- Flexible rubber sleeve bends and twists for tidy routing
- Backwards compatible with SATA 1.5 Gbps devices
13-Inch Low-Profile SATA Cable
This 13-inch SATA cable connects a motherboard or controller to a Serial ATA hard drive, SSD or optical drive. The low-profile right-angle connector fits tight spaces where a standard plug would foul adjacent components. It is suited for desktop PCs, notebooks and servers that use internal SATA storage.
Sustained 6.0 Gbps Operation
Rated for the SATA 6.0 Gbps revision, the cable maintains the full 600 MB/s throughput during long transfers rather than only in short bursts. Shielded construction with silver-meshing protects the signal from EMI and RFI, while the flexible rubber sleeve resists vibration without stiffening over time. Backwards compatibility covers 1.5 Gbps and 3.0 Gbps devices automatically.
Clearance and Port Orientation Check
Verify that the target drive or backplane presents a straight SATA port and that the host side can accept a right-angle plug pointing in the required direction. The 1.08-foot length suits short runs; measure the routing path to confirm it reaches without tension. Buyers who need a longer reach or a straight-to-straight layout should select a different cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 93% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | LP30SR330 |
| Size & build | |
| Cable length | 1.08 ft / 8 in |
Questions about this item
Does the 6.0 Gbps SATA III cable generate extra heat or draw more power during continuous operation?
The cable is a passive signal link; it adds no active components, so it produces no measurable heat and draws no power beyond the negligible resistance of the conductors.
What existing port or device must I already have for this straight-to-right-angle cable to function?
You need a standard SATA data port on your motherboard or controller and a matching SATA connector on the target drive or optical device.
Will the LP30SR330 work reliably with older 1.5 Gbps SATA I drives I still use?
Yes, the cable is backward compatible with SATA 1.5 Gbps devices and will negotiate the lower speed automatically.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 12 Inch LP4 to Dual Right-Angle SATA Power Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
CoolGear SS-22MPS SATA power splitter 1 to 3 15-pin
- 1 SATA to 3X SATA





